
ZS SQUARE II 4.0 S
Two Post Inground Lift With swing arm support 4000 kg
VP 252297
Description |
Two-post in-ground lift with swing arm support
Swing arm support with wheel guides:
- Last swing arm extension very flat with very low minimum pad heights of 71 mm for very flat vehicles despite a load capacity of 4000 kg
- Swing arm support with continuously telescoping 3-part support arms for large and flexible support area
- Large drive-through width with drive-over wheel guides to facilitate driving onto the lift
- Automatic support-arm restraint can be reached particularly easily from above for manual readjustment of the support arms in raised set-up condition
- Accurate take-up of vehicles thanks to standard height-adjustable turning plates with thread and plug-in system
- Support raisers and form-locking vehicle mounts for secure vehicle fixing in the product range
- Optional flush installation with hinged-lid frame for flexible use of work area (various models)
- Optional increase of max. lifting height to 2165 mm in conjunction with a deeper installation box (VZ 972520, various models)
- Pinch point protection thanks to CE stop rather than foot guard
SQUARE lift unit:
- Ample freedom of movement below the lifting platform thanks to the compact post-lifting unit and resulting optimum lighting below the raised vehicle
- Outstanding rigidity and optimum safety thanks to torsion-resistant square post
- Very quiet pump and very quiet electric motor in corrosion-proof oil-submerged design, optionally with bio oil
- Electronic lift control with no-contact, wear-free limit switches and visual error display
- Very smooth running due to special long-life nickel coating on posts that promotes sliding, with robust, low-maintenance post design
- Protected internal hydraulic safety cylinder guarantee lengthy service life
- Mobile synchronisation and safety yoke for careful distribution of force in the post guide as standard
- High lifting/lowering speeds are guaranteed (max. 35/35 s)
- Battery-operated emergency lowering
- Optimisation of workplace ergonomics mentioned thanks to optional, standard-independent control via traffic-light energy module or flush-mounted switching system
Standard Delivery:
- Swing arm support (4.0 SG) with swing arm holder and swing arm extensions, anthracite grey (RAL 7016)
- Support disc and support raiser 50 mm
- Wheel nut tray, magnetic (2 pcs.)
- Lift unit with movable yoke
- Wiring and mounting material
- Installation box/installation frame not included in delivery
- Emergency DOWN cable for connection to switch box
- Control unit with 2 x 10 m control cables (flexible oil cables)
- Lockable master switch
- Operating manual and test log
- EC Declaration of Conformity CE
Technical data |
Load capacity CE | 4000 kg |
Lifting height max. | 2009 mm |
Raising / Lowering time (load-dependent) approx. | 35 s / 35 s |
Installation depth | 2382 mm |
Piston centers | 2500 mm |
Post dimensions, square | 180 mm |
Swing arm pivot point spacing | 3200 mm |
Swing arm extension | 795 mm - 1480 mm |
Disc adjustment range | 77 mm - 109 mm |
Disk adapter extenders | 50 mm |
Total width | 3380 mm |
Drive-through width | 3040 mm |
Operating pressure | 160 bar |
Motor power | 3 kW |
Fuse gG | 16 A |
Power supply | 3/N/PE 400 V 50 Hz |
Control unit (H x W x D) | 320 mm x 220 mm x 120 mm |
Hydraulic fluid quantity (not included in standard delivery) | 28 l |
Images |
Request for quotation